If you wish to take pleasure in the surrounding landscapes and the view of your backyards, then your patio door helps you to do so. However, if a windowpane breaks or the door gets damaged, then it can spoil the whole enjoyment and the view as well. You can come out of this problem, if you follow a few simple steps. With these steps, you can easily replace your patio door. The steps are mentioned below.
Difficulty Level: Moderate
- Reciprocating Saw
- Utility Knife
- Caulk gun
- Small pry bar
- Tube of caulking
1. Pry off the inner trim:
With the help of the pry bar, you should firstly pry away the internal trim of your door.
2. Remove the stile cover:
Take away the stile cover, after unscrewing it. Further, lift up the base out of the track and then grab the sliding panel and tilt the top in.
3. Unbolt the brackets:
Hold the stationary door firmly and then loosen the brackets. You should then make use of the utility
4. Pry off the outer trim:
You should also pry off the external trim with the help of the reciprocating saw as well as the pry bar. Cut through the pins amid the framing and the frame, and then take away the frame from the gap.
5. Level the sill:
Make sure to check whether the sill is level or not. You should also put in some lines of caulking onto the entrance and then rise up the new frame into proper place.
6. Square off the frame:
To square and center off the frame, you should utilize shims and a level. Once you position it correctly, fasten it into its place.
7. Make final changes:
Bend the still door into the new frame and then elevate into the track. Screw in any brackets, if required to hold the door firmly. Make any kind of final adjustments, if needed for squaring the frame.
8. Put back the stile cover:
incline the sliding door in the frame and then lift in the track. Reinstate the stile cover and fasten it firmly.
9. Level the gap:
Keep the sliding door partly open, and then fine-tune the roller height with a screwdriver until the opening amid the door and the door jamb is level from top to the base.
10. Place back the trim:
Finally, put back the trim on the external and internal walls.
Frequently asked questions:
What sort of window covering can I utilize for my patio doors?
There are numerous sorts of window coverings, which you can choose for patio doors. You can utilize different types of blinds such as, wooden mini blinds, vertical fabric blinds or something in between. In this way, you can draw up the blinds whenever you wish to let some natural light come in, and then close the blinds, when you want some privacy. You can even use blackout curtains, which can be useful if you wish to keep natural light away completely.
- Gather all the necessary tools, which are handy when you replace a patio door, as this will help you to save a lot of time.
Things to watch out for:
- While performing the job remember to put on gloves as well as protective eye wear, so that you can stay away from any kind of injury.
- If you are planning to change the glass along with the patio door, then you should make sure that the young ones are away from that place. This will protect them from any kind of harm.