If the flood hits your home because of pipe bursts or during summer storm unexpectedly, you need a sump pump for security purpose. You have to the sump pump is dry because of any unpleasant surprise. For most people, they will let the sump pump be idling there in their basement for many years without checking on it. It is essential to maintain it so that it can run properly for an extended time.
Cleaning a sump pump
You need to check the sump pump routinely at least after few months or yearly. It will help to ensure the pump stays in a conducive condition. Here are essential steps to help in cleaning the sump pump:
- Shut off – before you can start cleaning your sump pump turn the switch OFF. Moreover, you also have to remove from the power source.
- Disconnection – so that you can clean the sump pump effectively, disconnect the sump pump from the discharge pump.
- Cleaning – after you take the sump pump, clean any accumulated dirt by washing it with clean water.
- Dry – it is essential to remove standing water using a wet-vac and then replace its check valve after you rinse the sump pump.
- Restore – after cleaning and drying, and you can reconnect the sump pump again and plug in.
Replacing Sump Pump
You can do proper maintenance of the sump pump, but eventually, the time for replacement will come. For most pumps, they have a life of 10 years, but there are signs that will tell you that you have to replace the sump pump.
Remember that next time you see a problem then check out the sump pump guides, the pump is worn out. It has finished its services and therefore need a replacement. Here are things you should check to guide you on replacement:
Turning on and off – when you realize that the sump pump turns on and off sporadically, it means the float switch is stuck. It is an issue that leads to burning out of the motor and end up limiting the life of your sump pump significantly.
Loud noises – there is an exception of faint hum, but when you realize that sump pump impeller and motor make a racket, it means that it needs replacement.
Extensive run times – in case the sump pump lacks big capacity in the required volume of water such that it doesn’t handle the volume expected, then it means that it is running longer than you expect in such conditions, the sump pump will probably cause burning of motor easily.
If you find that there is a problem with your sump pump, it will be good to consider a professional before deciding to replace it. The sump pump expert will guide you on the pump you should buy in case the last option is to replace. There are many things that can lead to pump failure, and you don’t know. So that you can detect the exact problem and fix it, you need an expert. The best thing is to avoid surprises during flooding because there can be a lot of damages to experience.
Article Submitted By Community Writer