As a wine lover we like to display our wines as interior design. A display of varieties of wines in the house has become a thing of pride. In fact, a good collection of wines and other high end drinks is often considered as an asset. To showcase your collection of heritage wines and leave an impression on your guests, you may need something more than just a bar counter. An elegant and sophisticated wine rack is a perfect fit to blend with your need to accommodate the wines. That’s because, with a wine rack you can keep all your priced wine bottles nicely organized according to the brand and age making it easier for you to pick the right one for every occasion.
While you can opt to buy a wine rack from a furniture or lifestyle goods store, building your own wine rack would be the best option. This way you can customize the design depending upon your requirements. Building a wine rack is not a difficult task. With some planning and patience, you can achieve a good outcome.
Complexity level: Moderate
Time required: 10-20 hours
Estimated cost: $ 20 to $ 50
Resources required:
- Hammer
- Saw
- Nails
- Wood
- Paint
- Wine bottles or your wine collection
Instructions:
1. Choose the location of the wine rack:
Before you start building your wine rack, it is important to decide the location where you would want to place it. Deciding this in advance is important as you can consider the dimensions of that wall and space as well which will make it fit easily later. Some people like their wine rack in the kitchen while others prefer it to be in the hall.
2. Take proper measurements and ensure you follow them precisely:
After you have selected the location, decide the size of your wine rack. The key to build a convenient wine rack lies in how well the measurements are taken and applied practically. You must consider the length of the rack according to the available space. The depth, however, can be at least 7 inches to accommodate most standard sized wine bottles.
3. Choose the design:
There are various ways in which you can design your wine rack. However, it is important to have a vague idea of how many bottles you plan to store on the rack. This will help you to conveniently design a rack to accommodate that many bottles.
4. Cut the wood as per the measurements:
Make sure that you cut the wood as per your decided measurements. Only by having the accurate measurements, you can build a wine rack without any flaws. You can use a saw to cut each piece of the wood. You can use some sand or sand paper to smoothen out any sharp edges. Drill holes wherever required and secure them with screws.
5. Give a finishing touch:
The last step perhaps is painting or polishing the wine rack. Make sure to choose your colors which blend well with the interiors of your room. You may also try the staining method. Whatever method you decide to choose, make sure that the coating is properly applied without any loopholes.
Frequently asked questions:
What is the best way to place the bottles?
Always try to place the bottles horizontally. This will prevent dirt from accumulating around the neck and also maintain the cork’s dampness. When it comes to the slots for holding wine bottles, you can either have square or diamond shaped cut-outs.
Quick tips:
- Try to make one slot for every bottle. This will make it convenient to use and easier to take out the bottle. You can also make slots for wine glasses.
- Many people keep their wine storage in the cellar, if their collection is too large. In this case, ensure to use a strong and sturdy wood to take the load. Also try to keep the air clean and fresh in the cellar.
Things to watch out for:
- Shallow depth of the wine rack may cause the wine bottles to fall out. Having a deeper container keeps the bottles steady.
- While installing the rack, make sure that the base is sturdy enough to bear the load of the rack and the bottles.
